Installation
Installation of the system is carried out at authorised workshops, which specialise in LPG installations. All accredited installers carry out quality workmanship and are familiar with our product range.

Warranty
Systems carry the standard manufacturers warranty. *Low cost warranty available; New vehicles 3yr 100,000km, Used vehicles 2 yr 30,000km.
The Ford BA sedan utilises specific vehicle components that minimise alterations to the vehicle.
*Conditions Apply

Fuel Selector Switch
The fuel selector switch is located in the centre console forward of the ‘T’bar gear selector. The switch has 2 main positions: LPG and Petrol (ULP). When running on LPG the switch will show a light indicating that the vehicle is in LPG mode, and vice versa for petrol operation. The vehicle will operate solely on the fuel selected via the fuel selection switch - petrol (ULP) or LPG.

Fuel Gauge (Interface)
The level of LPG is measured using the existing petrol gauge on the dash of the vehicle. This is referred to as an interface gauge, where the one
gauge measures 2 different fuels, depending on the fuel operation of the vehicle at the time. During LPG operation, the fuel gauge will show the level of LPG in the LPG storage cylinder; the same gauge will show the remaining petrol in the petrol tank when operating on petrol (ULP).

LPG filler location

	SEDAN The LPG filler on the Ford BA sedan is located in the existing petrol filler pocket, along with the petrol filler. Having the filler in this location maintains the vehicles’ original design presentation.
	WAGON The LPG filler on the Ford BA wagon is located in the existing petrol filler pocket, along with the petrol filler. Having the filler in this location maintains the vehicles’ original design presentation.
	UTILITY The LPG filler on the Ford BA Utility is located in the existing petrol filler pocket, along with the petrol filler. Having the filler in this location maintains the vehicles’ original design presentation. On the Ford BA cab chassis the filler is located next to the petrol filler under the tray.

Cylinder Location

	SEDAN There are two options available: 1. The cylinder is located behind the rear seat squab. This cylinder gives you 52 useable litres of LPG; or 2. A toroidal cylinder can be located in the spare wheel well and gives you 68 useable litres of LPG. The spare wheel is then mounted on a bracket in the boot. (picture shows the spare tyre location when toroidal cylinder is installed)
	WAGON The LPG storage cylinder for the Ford BA wagon is located beneath the cargo area in place of the spare wheel. The storage cylinder holds a total of 68 useable litres of LPG. The spare wheel is relocated to the drivers side of the rear cargo area, using an upright engineered vehicle specific wheel bracket. The size of the wagon cargo area, and the cylinder location, still provides the driver with roomy luggage and cargo accommodation.
	UTILITY Mid mount cylinder location, where the LPG storage cylinder is mounted under the vehicle in the middle, holding a useable 60 litres of LPG.

All LPG cylinders are tested in accordance to the relevant design rules and Australian Standards.