Impco air valve system
Global Autogas Supplies, offer a range of after-market LPG systems to suit most makes and models of vehicles.

Installation
Installation of the system is carried out at authorised workshops, which specialise in LPG installations. All accredited installers carry out quality workmanship and are familiar with our product range.

Warranty
Systems carry the standard manufacturers warranty. *Low cost warranty available; New vehicles 3yr 100,000km, Used vehicles 2 yr 30,000km.
The Toyota Landcruiser utilises specific vehicle components that minimise alterations to the vehicle.
*Conditions Apply

Fuel Selector Switch
The fuel selector switch is located on the dash of the vehicle, as shown in the diagram. The switch has 2 main positions: LPG and Petrol (ULP).

When running on LPG the switch will show a light indicating that the vehicle is in LPG mode, and vice versa for petrol operation. The vehicle will operate solely on the fuel selected via the fuel selection switch - petrol (ULP) or LPG

Fuel Gauge (Auxiliary)
The level of LPG is measured using a separate fuel gauge to the existing petrol gauge on the dash. The LPG gauge in this case is known as an "Auxiliary" gauge, where only the LPG fuel level is shown. Having a separate fuel gauge allows the driver to view the levels of both fuels at any given time.

	Refueling - LPG filler location The LPG filler on the Toyota Landcruiser 100 series is located in the existing petrol filler pocket, along the petrol filler. Having the filler in this location, maintains the vehicles original design presentation. It also eliminates the need to drill additional holes in the body panels to accommodate for the LPG filler.
	Cylinder location The Toyota Landcruiser 100 series V8 cylinder is located uderneath the vehicle, at the rear, holding a useable 95 litres of LPG. The spare wheel is relocated, using an engineered spare wheel bracket on to the rear of the vehicle. The sub tank is removed, to allow for the LPG storage cylinder.